Table of Contents
Advertisement
SAFETY RULES
*
The safety could not be assured if the instructions for use are not closely
followed.
*
This product is designed for splicing glass optical FIBREs used for communication
and it is strictly forbidden to splice other substances. Mis-operations can cause
electric shock, fire or personal injury. Please carefully read and observe the
following rules for your own safety.
*
The external charger is Class I equipment. For safety reasons plug it to a supply
line with the corresponding ground terminal.
*
Use the mains adapter in Over-Voltage Category II installations and Pollution
Degree 1 environments. It is for INDOOR USE.
*
Use the power supply unit provided by this product mix . Do not use other power
adapter, battery or power line. Do not use this product under other voltages so as
not to cause fire or electric shock.
*
When using some of the following accessories use only the specified ones to
ensure safety:
Power adapter.
Mains cord.
Electrodes.
*
Don't let liquid such as water or metal material drop into the equipment, otherwise
it may cause fire, electric shock or equipment breakdown. Stop using the
equipment, unplug the battery socket and contact PROMAX (00 34 93 184 77 00).
*
Must not use the fusion splicer under combustible or explosive environment ,
otherwise it may cause fire or explosion.
*
Observe all specified ratings both of supply and measurement.
*
Remember that voltages higher than 70 V DC or 33 V AC rms are dangerous.
*
Use this instrument under the specified environmental conditions.
*
The user is not authorised to manipulate inside the instrument:
Replacing electrodes.
*
Do not touch the electrodes when the fusion splicer is operating which may cause
injury by high voltage generated by arc of electrodes. Ensure that the power is off
and the power line has been unpluged when replacing the electrodes.
*
In the Maintenance section provides instructions specific to this intervention.
November 2018
Advertisement
Table of Contents
