Promax Prolite-41 User Manual page 44

Warning information
(English information
is contained within
the brackets)
Right fibre head face is
unqualified (LRFEANQ)
Left and Right fibre head
face are unqualified
(FANQ)
Estimated loss amount is
too much
Power is too insufficient
Replace electrodes
Records exceed limit
Alignment abnormity
Timeout abnormity
Field of view abnormity
Data abnormity
Light source abnormity
36
Page
Reason
Right fibre head face angle
exceeds limit.
Left and Right fibre head face
angle exceeds limit.
Splice loss exceeds limit.
The selected program do
not match the fibre type.
Current remaining battery less
than 2%.
Electrodes arc records exceed
the limit
Splice records exceed the limit
Fibre head face is dusty or
head face is poor.
Windproof cover is pressed
too tightly.
LED lamp brightness is
inappropriate
Alignment during
process takes longer time.
Electrodes placement
incorrect.
Equipment structure
damaged.
The equipment is running in
abnormal state
LED lamp brightness is
inappropriate.
Windproof
inappropriately placed.
Countermeasures
Solution refer to the above
Solution refer to the above
Clean
"Arc correction" then splice again
Use power adapter to charge
Replace
"Replace
system parameters")
Use USB data cable to transmit
the original splice records, then
operate "Delete Arc Records"
Re-cleave and clean fibre, then
try alignment.
If problem still remains, operate
"Detect system parameters" or
restart the equipment.
Restart
splice
Restart
problem still remains.
Operate
is
parameters", if the error still
exists, reinstall electrode bars. If
is
the problem remains, contact the
aftersales service department.
It does not affect the operation,
continue alignment and splicing.
Restart the equipment if the error
still exists.
Operate
parameters"
cover is
problem
aftersales service department
v-groove, repeater
electrodes (operate
Electrodes", "Detect
alignment and fusion.
the equipment if
"Detect system
"Detect system
firstly. If
remains, contact
April 2016
the
the
the