Table of Contents
Advertisement
*
Optical fibre fusion splicer must be repaired and debugged by professional.
Incorrect repair may cause fire or electrical shock. If a failure occurs, please
contact PROMAX (00 34 93 184 77 00).
*
Once smoking, bad smell or abnormal noise occurs, stop using the fusion splicer
immediately, unplug the power plug and contact PROMAX (00 34 93 184 77 00).
Continue using may cause fire, electric shock or equipment breakdown.
*
Disassembling or reassembling the fusion splicer, reassembling the battery or
power adapter is prohibited to avoid over-heating, burst or fire.
*
Please strictly follow the operation manual on how to use the battery. Wrong
operations can cause battery over-heating, burst or explosion leading to fire or
personal injury.
Please don't use other methods beyond this manual to charge the battery.
Please don't throw the battery into fire.
Please don't connect positive and negative electrodes with reverse
interfaces.
Please don't charge or discharge under high temperature, fire or directly
sunlight..
Please don't throw or strike battery.
If the battery electrolyte leaks out, handle it carefully. If the spill contacts
skin or eyes inadvertently, you must thoroughly clean and immediately
take medical treatment, at the same time inform PROMAX (00 34 93 184
77 00).
*
Follow the cleaning instructions described in the Maintenance paragraph.
Symbols related with safety:
*
November 2018
Advertisement
Table of Contents
