Preparations Before Splice; Stripping Fibre's Other Protective Layers Outside The Coating Layer - Promax Prolite-41 User Manual

2.5

Preparations Before Splice

2.5.1

Stripping Fibre's Other Protective Layers Outside the Coating Layer

Clean the fibre (100mm from the tail) cotton dipped with alcohol. If it is
butterflied fibre, it needs a butterflied fibre pincers to strip outer coating 40mm
from its tip, as shown in Figure 11. Protective Layers of Other kinds of fibre can
be stripped by miller pincers and scissors (view Figure).
Strip external plastic layer with miller pincers.
Strip Internal plastic layer with miller pincers.
November 2018
Figure 11. Butterflied Fibre Strip.
Figure 12. Single Core Fibre Strip.
Cut off the wool with scissors.
Strip the only one plastic layer with miller
pincers.
11
Page