3 MAINTENANCE
3.1
Maintenance Menu
Maintenance Menu Descriptions
►
Arc correction
It corrects the arc value.
Clean electrodes
Repeats short arc several times to clean the electrodes.
Replace Electrodes
After replace electrodes, Repeats short arc several times to stabilize the
electrodes and to measure the electrodes position.
Self-test Mode
It measures the electrodes position, motor and other system parameters
automatically.
Correct led
When there is sudden change of temperature (for example when changing
from a very cold place to a warm place) it may appear fog on the camera
lens. Use this option to clear fog.
26
Page
Figure 28. Maintenance Menu.
November 2018