Specific Precautions
*
Don't use or store Optical fibre fusion splicer in high temperature and under highly
humid environment otherwise it may cause damage to the equipment.
*
Don't touch the heat shrinkable sleeve in the process of heating or just after
heating, for the high temperature may cause ambustion.
*
Don't touch the equipment with wet hand, AC power line or AC plug, otherwise it
may cause electric shock.
*
Don't use any other chemical except alcohol to clean the microscope lens, V-
groove or monitor, it may lead to blurred images or stains, even cause corrosion
and damage of equipment.
*
Please take appropriate dustproof measures when the equipment is operated
under dusty environment so as to avoid dust from entering the interior of the
equipment and cause breakdown.
*
Avoid the equipment from strong vibration and impact, it may cause equipment
damage. Please transport or store the equipment in specified carrying case.
*
When you activate the light-producing arc and the electrode under a voltage. Do
not open the lid and touch the electrode as it might damage.
*
The fusion splicer can only quartz glass fibre.
*
In case of any malfunction, breakdown or team entry into any type of material and
equipment immediately disconnect the external power supply and call service.
*
Do not use in presence of flammable substances.
*
Avoid dusty conditions and temperature or humidity.
*
When changing from cold to hot wait until thoroughly dry the condensation.
*
Do not disassemble the power module.
*
Maintenance are recommended once a year.
Descriptive Examples of Over-Voltage Categories
Cat I
Low voltage installations isolated from the mains.
Cat II Portable domestic installations.
Cat III Fixed domestic installations.
Cat IV Industrial installations.
November 2018