Annex 1 Warning Information - Promax Prolite-41 User Manual

ANNEX 1 WARNING INFORMATION
Warning information
(English information
is contained within
the brackets)
Incorrect placement of left
fibre (LFPC)
Right fibre placement is
incorrect (RFPC)
Left and Right fibre
placement are incorrect
(LRFPC)
Left fibre is unqualified
(LFNQ)
Right fibre is unqualified
(RFNQ)
Right fibre is unqualified
(LRFNQ)
Left fibre head face is
unqualified (LFEANQ)
November 2018
Reason
Left fibre is cleaved too
short.
The part of left fibre put
into V-groove is broken.
Left fibre is not put in to
the center of V-groove.
Left propulsion equipment
is incorrectly connected.
Right fibre is cleaved too
short.
The part of Right fibre put
into V-groove is broken.
Right fibre is not put into
the center of V-groove.
Right propulsion equipment
is incorrectly connected.
The same as above
Left fibre surface is dusty.
Left fibre is cleaved poorly,
such as core defect, cladding
defect or fibre incompleteness.
Right fibre surface is dusty.
Right fibre is
poorly, such as core defect,
cladding, defect,
incompleteness
The same as above
Left fibre head face
exceeds limit
Countermeasures
► In the case of
re-cleave left fibre and make sure
the cleaved length is appropriatel
► In the case of
fibre
► If the breakdown do not match
,do
/ /
parameters",
remains,
aftersales service department.
Solutions refer to the above
Solution refer to the above
► In the case of
to clean the left fibre.
► In the case of
fibre.
cleaved
Solution refer to the above
fibre
Solution refer to the above
► Re-cleave left fibre. If cutting
quality is still poor after multiple
trial, replace
angle
(Attention:
"Splicing
Angle Threshold",
angle limit can be set).
or
, replace left
"Detect system
If the problem
please contact the
, use alcohol
, remake
the blade
in "Menu"->
Mode" -> "Surface
head face
35
Page
,