Installation Guide - GRAPHTEC midi LOGGER GL240 Quick Start Manual

This guide describes how to install the GL240 application software.
System Requirements
This software can be installed on a PC which fulfills the following conditions.
OS : Windows 10 (32Bit/64Bit)
Windows 8.1 (32Bit/64Bit)
Windows 8 (32Bit/64Bit)
Windows 7 (32Bit/64Bit)
Windows Vista (32Bit/64Bit)
* The OSs which OS maker support has been completed are not supported.
CPU : Pentium4 1.7GHz or higher
Memory : 256MB or more (512MB or more recommended)
HDD : 200MB (1GB recommended) additional space required for installing the application
software
Display : Resolution 1024 x 768 or higher, 65535 colors or above
(16 Bit or higher)
Others : CD-ROM drive (for installation from a CD) and USB port are necessary.
To Install the USB Driver
To connect this unit to a PC with the USB interface, a USB driver must be installed
in the PC.
A USB driver and the USB driver installation manual are stored on the supplied
CD-ROM. Install the USB driver according to this manual.
(The manual location: D:\USB Driver\English\GL-USB-UM152.PDF)
Note: D: drive name of CD-ROM. The letter of CD-ROM drive vary it with the CD-ROM drive of your PC.
To Install GL240 Application Software
To install the application software which sets and controls the GL240, follow the
directions below.
1. Insert the accompanying midi LOGGER GL240 CD-ROM in the PC's CD drive.
2. Select [Start] > [Run] to open the [Run] window.
3. In the [Open] field, type in "D:\GL100_240_840-APS\Setup_English.exe" and
press [OK].
The installer starts.
4. Follow all directions displayed by the installer to continue.
Note: D: drive name of CD-ROM. The letter of CD-ROM drive vary it with the CD-ROM drive of your PC.

Installation Guide

* Starter Edition are not supported.
21