GRAPHTEC midi LOGGER GL240 Quick Start Manual page 19

Hide thumbs Also See for midi LOGGER GL240:

Table of Contents

(4) Move the cursor to the "Level" parameter next to the "Mode" parameter

and then press the [ENTER] key.

(5) The input box shown in the following screen is displayed. Select "20".

Use the

and

keys to move to the cursor to the second digit from the

right, and the

and

key.

(6) When the screen changes to the following screen, move the cursor to the

button and then press the [ENTER] key.

(7) The screen returns to the TRIG menu screen. Press the [QUIT] key to

return the GL240 to the Free Running status.

(8) Press the [START/STOP] key to start data capture.

If the trigger condition has not been satisfied, the GL240 goes into the

"Armed" status as shown on the following screen.

When the trigger condition is satisfied, the data capturing is started.

keys to change the value. Press the [ENTER]

Numerical value input box

Lower and upper limit for setting.

Waveform area for confirmation Lower

•Use the

values.

•Use the

digit.

•Use the [ENTER] key to enter the

value.

•Use the [QUIT] key to cancel the

setting.

and

keys to change the

and

keys to move the

Table of Contents

Show Quick Links

Table of Contents