Technical Specification; Environmental Data; Electrical Ratings; Field Fusing - Parker 598P Applications Manual

Technical Specification

ENVIRONMENTAL DATA

Operating Temperature
Storage Temperature
Shipping Temperature
Enclosure Rating
Altitude Rating
Humidity
Atmosphere
Climatic
Safety
Europe

ELECTRICAL RATINGS

Coding Supply Voltage
Field Supply Voltage
Supply Frequency
Armature Thyristor
Firing Isolation
Output Current
Supply Current
Field Coding
Field Output Voltage
Total Losses
Auxiliary Supply
Auxiliary Supply Current
Auxiliary Supply Fuse

FIELD FUSING

DC Output Supply Voltage
60 Amps 500 Vac
120 Amps 500 Vac
60 Amps 690 Vac
120 Amps 690 Vac
598P/599P Application Manual
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com
0 to +45°C
-25 to +55°C
-25 to +70°C
IP20
Maximum Altitude 500 metres.
De-rate the Output at 1% per 200 metres.
Maximum 85% relative Humidity at 45°C non-condensing.
Non flammable, non-corrosive and dust free.
Class 3k3 as defined by EN60721-3-3 (1995).
Designed to : -
EN50178 when enclosure mounted.
Overvoltage Category III
Pollution Degree 2
110 – 240 Vac ±10% 3ph – Low Voltage Build
220 – 500 Vac ±10% 3ph – Medium Voltage Build
380 – 690 Vac ±10% 3ph – High Voltage Build
110 – 240 Vac ±10% 1ph – Low Voltage Build
*220 – 500 Vac ±10% 1ph – Medium Voltage Build
*380 – 690 Vac ±10% 1ph – High Voltage Build
The field supply of the 220-500V and 380-690Vac rated products must
*
be derived from line-to-line of a 3 phase supply, NOT from line-to-neutral.
50/60 Hz ±10%
Suitable for external stack supply system rated:
Overvoltage Category III
Max. 500Vac rms for Medium Voltage Build
Max. 690Vac rms for High Voltage Build
60 Amps dc naturally cooled - 120 amps dc Force Cooled.
De-rate linearly at 1% per °C above rated temperature.
(1 times Field Current dc value) Amps 1ph ac.
Nominal 3ph ac.
(0.9 times 1ph Supply Voltage) V dc
(3 times Idc out) Watts.
110 – 240 Vac ±10% 1ph – Naturally Cooled.
110 – 120 Vac ±10% 1ph – Force Cooled 115 Vac Fan configuration.
220 – 240 Vac ±10% 1ph – Force Cooled 230 Vac Fan configuration.
SMPS Quiescent Current – 500mA 115 Vac or 250mA 230 Vac i.e. 50 VA.
Fan Current - 270mA @ 115 Vac or 135mA @ 230 Vac.
3 Amps.
Semiconductor I 2 t
2
19100 A s
2
19100 A s
8830 A 2 s
8830 A 2 s
Fuse Rating Fuse I 2 t
2
80 amps 2550 A s
2
125 amps 8500 A s
80 amps 2550 A 2 s
125 amps 8500 A 2 s
11 of 20
Parker SSD Part
No.
CH570084
CH571253
CH570084
CH571253