Type Specification Plate Compax3 Fluid - Parker Compax3 Fluid Installation Manual

Parker EME
2.3

Type specification plate Compax3 Fluid

Type specification
plate Compax3
Fluid:
You will find the exact description of the device on the type specification
plate, which is located on the right side of the device:
Explanation:
1 Type designation
2 C3F001D2
3 Unique number of the particular device
4 Supply voltage
5 Date of factory test
6 Designation of the
feedback system
7 Device interface
Technology function T11:Positioning / pressure/force control
8
9 Options
10 CE compliance
11 UL certification
192-121100 N7 December 2010
The complete order designation of the device (2, 6 - 9...)
(category no.)
C3: Abbreviation for Compax3
F =Fluid: Hydraulics Controller
001: +/-10V and 0..20mA outputs (16 Bit)
D2: 24VDC device
24 VDC
F12:Feedback Module
I11 / I12:Digital Inputs / Outputs and RS232 / RS485
I20:Profibus DP / I21:CANopen / I22:DeviceNet /
I30:Ethernet Powerlink / I31: EtherCAT / I32: Profinet
T30:Motion control programmable according to IEC61131-3
T40:Electronic cam
Mxx:
PD2 (see on page 25)
(degree of pollution)
Introduction
7