Type Specification Plate Compax3 Fluid - Parker Compax3 Installation Manual

Introduction
2.2

Type specification plate Compax3 Fluid

Type specification
plate Compax3
Fluid:
8
You will find the exact description of the device on the type specification
plate, which is located on the right side of the device:
Explanation:
1 Type designation
2 C3F001D2
3 Unique number of the particular device
4 Supply voltage
5 Date of factory test
6 Designation of the
feedback system
7 Device interface
8 Technology function
9 Options
10 CE compliance
11 UL certification
192-121100 N6 June 2008
The complete order designation of the device (2, 6, -9...)
(Category No.)
C3:Abbreviation for Compax3
F =Fluid:Hydraulics controller
001:+/-10V and 0..20mA outputs (16 Bit)
D2:24VDC device
24 VDC
F12: Feedback Module
I11 / I12: Digital Inputs / Outputs and RS232 / RS485
I20: Profibus DP
I21: CANopen
I22: DeviceNet
T11: Positioning / pressure/force control
T30: Motion control programmable according to IEC61131-3
T40: Electronic cam generation
Mxx:
PD2 (see page 25)
(degree of pollution)
Hydraulics controller