Changing The Axial Ring Seals - Krautzberger KAA 1300 Operating Instructions Manual

Automatic spray gun KAA 1300
8.9

Changing the axial ring seals

Disassembly
1. Dismantle the valve needle (
2. Dismantle the valve seat screw and material nozzle (
screw and material nozzle' on page 32).
Fig. 19: Axial ring seals
3. Pull the slotted ring ( Fig. 19/4) from the axial ring ( Fig. 19/5).
4. Unscrew the threaded ring ( Fig. 19/3) from the main element ( Fig. 19/1).
NOTICE!
Do not damage the slot for the screwdriver.
5. Remove the seal ( Fig. 19/2) from the threaded ring ( Fig. 19/3).
Use a wire hook to pull out the seal ( Fig. 19/2). Be careful not to damage any threads.
Installation
6.
WARNING!
Risk of injury through the use of incorrect spare parts!
Insert the new seal into the threaded ring.
7. Tighten the threaded ring.
Item number: 200-0201
Ä Chapter 8.6 'Changing the valve needle' on page 30).
Ä Chapter 8.7 'Change valve seat
ENGLISH
GB–37