Changing Needle Packing - Krautzberger A-14 Operating Instructions Manual

Automatic spray gun A-14
7.5

Changing needle packing

Removing needle packing
1. Clean automatic spray gun (
2. Remove the fluid needle (
Fig. 16: Removing needle packing
3. Unscrew the screw (Fig. 16/1) from the transition part (Fig. 16/3) and the main element (/2).
4. Remove the transition part (Fig. 16/3) from the main element (Fig. 16/2).
Fig. 17: Removing needle packing
5. Unscrew the seal screw (Fig. 17/1).
6. Remove all of the needle packing (Fig. 17/2) from the transition part (Fig. 17/3).
7. Remove the seals (Fig. 17/5) from the centring tubes (Fig. 17/4).
■ 200-0151
Ä Chapter 7.2 'Cleaning spray guns' on page 25
Ä Chapter 7.4 'Changing the fluid needle' on page 27)
ENGLISH
GB–29