Appendix D Selecting A Correct Battery Size; Battery Specification For Access Easy Controller 2.1 - Bosch Access Easy Controller 2.1 Hardware Installation Manual

Access Easy Controller 2.1
21

Appendix D Selecting A Correct Battery Size

This section provides information on choosing the correct battery for the AEC2.1 system.
21.1

Battery Specification for Access Easy Controller 2.1

The following battery specifications are recommended for the use of AEC.
Specifications
Nominal Voltage
Capacity (20HR, 25°C)
Dimension
Approx. Weight
Internal Resistance
(Fully Charged, 25°C)
Capacity affected by
temperature (20HR)
Self-discharge
(25°C)
Nominal Operating Temperature
Operating Temperature range
Float Charging Voltage (25°C)
Cyclic Charging Voltage (25°C)
Maximum Charging Current
Terminal Material
Maximum Discharge Current
Warning!
There is a danger of explosion if the battery is incorrectly placed. Replace only with the same
!
type of battery recommended.
Robert Bosch (SEA) Pte Ltd
Appendix D Selecting A Correct Battery Size | en 111
Length
Width
Height
Total Height
40°C
25°C
0°C
-15°C
3 month
6 month
12 month
Hardware Installation Manual
12V
7 Ah
151mm (5.94 inch)
65mm (2.56 inch)
94mm (3.70 inch)
100mm (3.94 inch)
2.35Kg (5.18 lbs)
Approx. 25mΩ
102%
100%
85%
65%
Remaining capacity: 91%
Remaining capacity: 82%
Remaining capacity: 65%
25°C ± 3°C (77oF ± 5oF)
-15°C ~ 50°C (5oF ~ 122oF)
13.60 to 13.80 V
14.50 to 14.90 V
2.1 A
Copper
105 A (5sec)
2018.11 | 1.0.6 | F.01U.122.796