Bosch Access Easy Controller 2.1 Hardware Installation Manual page 104

104 en | Appendix A How to Install & Set the TCP/IP Address on a PC
10. Enter the IP Address and Subnet Mask Address. The following examples shows the
11. Click the
12. The computer will proceed to configure the TCP/IP settings. When completed, you will be
2018.11 | 1.0.6 | F.01U.122.796
recommended address and subnet mask to assign to the computer to communicate with
a brand new AEC2.1 as received from the factory. Leave DNS field blank.
button after verifying the IP address and subnet mask.
prompted to reboot the computer for the new settings to take effect.
Hardware Installation Manual
Access Easy Controller 2.1
Robert Bosch (SEA) Pte Ltd