Appendix G Blank Configuration Form - Bosch Access Easy Controller 2.1 Hardware Installation Manual

Table of Contents

Advertisement

Access Easy Controller 2.1
24

Appendix G Blank Configuration Form

This chapter provides blank configuration form for 4-Reader boards or 8-IO boards. The
System Installer could use them to plan the set up before commencing on the installation. This
form will also help the Installer doing the AEC2.1 programming to assign the correct address
to devices in the system.
AEC2.1 Boards Configuration Page ____ of ____
4-Reader Board
SW1 Address Settings:
Reader Ports
T8-1 to T8-6
T9-1 to T9-6
T10-1 to T10-6
T11-1 to T11-6
Input Channels
T6-1 and T6-2
T6-3 and T6-4
T6-5 and T6-6
T6-7 and T6-8
T7-1 and T7-2
T7-3 and T7-4
T7-5 and T7-6
T7-7 and T7-8
Output Channels
T2-1 to T2-3
T2-4 to T2-6
T3-1 to T3-3
T3-4 to T3-6
T4-1 to T4-3
Robert Bosch (SEA) Pte Ltd
Reader Number / Description (e.g. Reader #1 / Door 1)
Device Connected / Description (e.g. Exit Push Button for Door 1)
Device Connected / Description (e.g. Door Strike for Door 1)
Hardware Installation Manual
Appendix G Blank Configuration Form | en 127
2018.11 | 1.0.6 | F.01U.122.796

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aec-aec21-ext1Apc-aec21-ups1

Table of Contents