Card Reader Keypad Functions; Keypad Layout; Keypad Functions; Entry Operation - Bosch Access Easy Controller 2.1 Hardware Installation Manual

Table of Contents

Advertisement

Access Easy Controller 2.1
12

Card Reader Keypad Functions

AEC2.1 supports a range of Card Readers for different card types that is suitable for use in
AEC2.1 Panel.
Some Card Readers come with built-in Keypad that is most suitable for use as Entry reader.
Depending on the model selected, the Keypad could be either a 3X4 or a 4X4 buttons layout.
This Chapter explains the function(s) of the key or a combination of keys on the Keypad.
12.1

Keypad Layout

The figure below shows two typical keypad layouts for card reader units. The size and shape
of the keypad may be different depending on the type of card reader units.
Figure 12.1: Keypad Layouts
12.1.1

Keypad Functions

For the 3x4 matrix keypad, each numeric key is also used as special function key. The special
function keys are described below.
For the 4x4 matrix keypad, there are 4 dedicated function keys. However, each numeric key is
also used as special function key. The special function keys are described below.
1.
2.
3.
4.
5.
6.
7.
12.2

Entry Operation

The following sections highlight the various means to enter and exit a controlled area using
the keypad. These functions MUST be enabled in the Card Reader parameter setting before it
could be used. Refer to the AEC2.1 Software manual for details in enabling these functions.
12.2.1

Using Card + PIN Mode on a Keypad Reader

Follow the procedure below to gain access:
Robert Bosch (SEA) Pte Ltd
2
3
1
4
5
6
7
8
9
0
#
*
3X4 Keypad
The
or key is used for changing PIN code.
The key is used to allow manual card number entry.
The key is used in order for the system to capture the clock-in times of the cardholders
(employees and guards).
The key is used in order for the system to capture the clock-out times of the cardholders
(employees only).
The
or
key is used to terminate an entry.
The
or
key is used to cancel/quit any changes made.
The key is used together with an arming card to arm an alarm zones.
Hardware Installation Manual
F1
1
2
3
F2
4
5
6
7
8
9
F3
C
0
F4
E
4X4 Keypad
Card Reader Keypad Functions | en
2018.11 | 1.0.6 | F.01U.122.796
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aec-aec21-ext1Apc-aec21-ups1

Table of Contents