Magtek DynaPro Go Installation And Operation Manual page 59

Appendix A - Technical Specifications
Data Connections:
Wireless Range(s):
Battery Capacity:
Battery Charge, Powered Off:
Battery Charge, Standby:
Battery Charge, Active:
Power Inputs:
Maximum Current Draw:
Voltage Requirement:
Battery Type:
RF Frequencies and Power:
Flash Memory:
Tested Operating System(s):
Operating temperature:
Operating relative humidity:
Storage temperature:
Storage relative humidity:
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
DynaPro Go Technical Specifications
Communications Characteristics
TCP/IP over 802.11 wireless
Micro-USB, implements USB 1.1 and USB 2.0
BLE and Bluetooth wireless (select models)
Wireless network: 150 ft. (45m)
NFC: 1.6 in. (40mm)
Electrical Characteristics
1700 mAh nominal (rated)
1 year (new device)
6 hours (new device)
micro-USB connector
Charging cradle contacts
1A
5VDC
Lithium Polymer rechargeable for main power
Lithium coin cell for backup
802.11 Wireless:
Average Power Radiated: 1.02mW (0.08 dBm)
Conducted Power = 97.7mW (19.89 dBm)
Frequency range 2400 MHz to 2497 MHz
Contactless Reader:
Radiated Power: 10.34dBm
Frequency range: 13.553 MHz to 13.567MHz
256 MBit
Software Characteristics
iOS 7.1 and later
Android 4.4.2 and later
Windows 7, Windows 8.1, Windows 10
Environmental Tolerance
32°F to 113°F (0°C to 45°C)
10% to 90% without condensation at 23 °C
14°F to 140 °F (-10 °C to 60 °C)
5% to 90% without condensation
Page 59 of 60 (D998200129-10)
*
*