Configuration - Magtek DynaPro Go Installation And Operation Manual

5 - Configuration

5 Configuration
The device has many commands the host software can use to change and monitor its behavior. They are
documented in detail in D998200136 DYNAPRO GO PROGRAMMER'S REFERENCE MANUAL
(COMMANDS). In addition, operators can view or change some configuration options using the keypad
and display. Table 5-1 provides details for using these features.
Table 5-1 - Keypad Configuration Features
Configuration Option
Open Host Connection
Change Active
Connection
LCD backlight mode
LCD backlight
brightness
Keypad backlight mode
Show device details
Show additional device
details
Show EMV device
details
Show wireless status
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Key Sequence
Left Function Key
1 2 3
Right Function Key
Left Function Key
4 5 6
Right Function Key
Left Function Key
5 2 2
Right Function Key
Left Function Key
5 2 3
Right Function Key
Left Function Key
5 3 3
Right Function Key
Left Function Key
7 8 2
Right Function Key
Left Function Key
7 8 1
Right Function Key
Left Function Key
7 8 3
Right Function Key
Left Function Key
6 2 2
Right Function Key
Page 22 of 60 (D998200129-10)
Notes
When the device is not always listening for
incoming connections, this key sequence opens an
unsecured TCP/IP connection to the host and
requests the host initiate a secured connection.
Toggles the device's active connection between
possible connection types.
Changes the mode of the LCD display backlight
between and
Auto Manual
to Configure the LCD Display Brightness.
Available if the host software has not configured
the device to use AUTO LCD brightness based on
the light sensor. See section 5.1 How to
Configure the LCD Display Brightness.
Changes the mode of the keypad backlight
between and
Auto Default
to Configure the Keypad Backlight.
Displays a page showing information about the
device. See section 6.2.2 Device Details Screens.
Displays a page showing information about the
device. See section 6.2.2 Device Details Screens.
Displays a page showing information about the
device. See section 6.2.2 Device Details Screens.
Displays a page showing information about the
device's 802.11 wireless connection. See section
6.2.4 Wireless Status Screen.
. See section 5.1 How
. See section 5.2 How