10-Digit Backlit Numeric Keypad With Function Keys; Low-Power Standby Modes - Magtek DynaPro Go Installation And Operation Manual

2 - Introduction
2.7

10-Digit Backlit Numeric Keypad With Function Keys

During normal operation, cardholders use the device's numeric keypad to securely enter PINs and other
numeric data (see Figure 2-1 on page 15). An audible tone provides feedback when pressing keys, and a
backlight makes data entry easy even in low light conditions. The keypad includes additional function
keys cardholders may press during a transaction:
Cardholders can press the green
•
Cardholders can press the red
•
context, it may cancel the entire transaction.
When presented with on-screen selection options, cardholders can press the
•
Middle Function Key
2.8

Low-Power Standby Modes

To conserve battery power, DynaPro Go enters low-power mode or powers off in response to a variety of
events, including screen timeouts ("Sleep Mode"), USB Suspend directives from a connected USB host,
critically low battery power, and periodic maintenance resets. Details about how DynaPro Go manages
and conserves battery power can be found in section 6.3 Power Management.
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
("OK") key to indicate they have finished their input.
ENTER
("X") key to halt the current operation. Depending on the
CANCEL
, or
Right Function Key
Page 14 of 60 (D998200129-10)
to select the desired response.
,
Left Function Key