Health And Safety Information; Wireless Status Screen - Magtek DynaPro Go Installation And Operation Manual

6 - Operation

6.2.3 Health and Safety Information

The device implements electronic labels ("e-labels") that report its
information. To access them, press the sequence
This brings up a page similar to Figure 6-6, with indicators on the bottom that show more information is
available by scrolling. Press
next e-label. To return to the

6.2.4 Wireless Status Screen

In addition to the icons at the top of the display, the device has a
deeper details about the wireless connection. To access it, press the sequence
,
2 Right function key
screen, press the
Cancel
For compatibility with similar MagTek devices, this screen may also launch with keystrokes
function key 4 7 2 Right function key
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Left Function Key
screen, press the
Welcome
Figure 6-6 - Health and Safety Screen 1
. This brings up a screen similar to Figure 6-7. To return to the
key.
Figure 6-7 - Wireless Status Screen
.
Page 40 of 60 (D998200129-10)
Health and Safety
, ,
Left Function Key 7
and
Right Function Key
key, or wait 10 seconds.
Cancel
Wireless Status
certification
, ,
8 0 Right function key
to scroll to the previous and
screen that reports
Left Function Key
Welcome
Left
.
, , ,
6 2