How To Enter Pins; How To Use Signature Capture - Magtek DynaPro Go Installation And Operation Manual

6 - Operation
6.7

How to Enter PINs

When a transaction requires the cardholder to enter a PIN, the device prompts the cardholder to
(see Figure 6-23) as required by the financial institution. The device expects the PIN to be between
PIN
4 and 12 digits long. After entering the PIN, the cardholder must press the
key below the on-screen
If the double PIN entry option is enabled, the device will prompt the cardholder to enter the PIN a second
time. The process for re-entry is identical to the process for the first entry.
6.8

How to Use Signature Capture

Some models of DynaPro Go include touchscreen functionality for signature capture. See the part
number label on the device and Table 2-1 - Available Models and Options on page 12 to see if the
device you are using supports signature capture.
To enter a signature, use the tip of your finger (not a hard object like a fingernail or stylus) to press and
glide against the touchscreen surface. Do not use a stylus or other hard object.
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
option.
Enter
Figure 6-23 - Example of User Screen to Enter PIN
Page 54 of 60 (D998200129-10)
ENTER
button or the function
ENTER