How To Change The Active Connection - Magtek DynaPro Go Installation And Operation Manual

5 - Configuration
5.3

How to Change the Active Connection

DynaPro Go supports multiple connection types, but only one interface can be active at a time. Initial
configuration requires the host to use the USB port, but after configuration, generally a live deployed
solution will only use one connection type.
To change the active connection, press to show a
Left Function Key 4 5 6 Right Function Key
confirmation screen to begin using the currently inactive connection type.
To change the active connection and return to the screen, press the key or key. To
Welcome Yes Enter
exit without changing the active connection, press the key or the button, or wait 10 seconds
Cancel No
for the device to return to the screen.
Welcome
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 26 of 60 (D998200129-10)