9.3
Status indications
Table 9-3 Status indications
Upper display
dEC
Speed is ramping to zero after a stop
inh
Enable input is inactive
POS
Position control active during orientation stop
rdY
Enable closed, but drive not active
run
Drive active and motor running
StoP
Drive active, but holding zero speed.
triP
Drive is tripped.
9.4
Trip masking
Drive trips can be masked by setting the appropriate trip code in Pr 10.52 to Pr 10.61.
Refer to Pr 10.52 to Pr 10.72 (Advanced parameter descriptions chapter - Menu 10) in
the Mentor MP Advanced User Guide for further information.
Mentor MP Short Form Guide
Issue Number: 5
Description
Decelerating
Inhibited
Position
Ready
Running
Stopped
Tripped
www.controltechniques.com
Drive output stage
Enabled
Disabled
Enabled
Disabled
Enabled
Enabled
Disabled
127