Saving Parameters - Emerson Mentor MP Short Manual

Table 5-3 Menu 40 parameter descriptions
40.00
40.01
40.02
40.03
40.04
40.05
40.06
40.07
40.08
40.09
40.10
40.11
40.19
40.20
40.21
40.22
40.23
Table 5-4 Menu 41 parameter descriptions
41.00
41.01 to
41.50
41.51
5.8

Saving parameters

When changing a parameter in Menu 0, the new value is saved when pressing the
Mode button to return to parameter view mode from parameter edit mode.
If parameters have been changed in the advanced menus, then the change will not be
saved automatically. A save function must be carried out.
Procedure
1. Enter SAVE in Pr xx.00
2. Either:
• Press the red
• Toggle the reset digital input, or
• Carry out a drive reset through serial communications by setting Pr 10.38 to
100 (ensure that Pr xx.00 returns to 0).
74
Parameter
Parameter 0
Language selection
Software version
Save to flash
LCD contrast
Drive and attribute database
upload was bypassed
Browsing favourites control
Keypad security code
Communication channel
selection
Hardware key code
Drive node ID (Address)
Flash ROM memory size
String database version number
Screen saver strings and enable
Screen saver interval
Turbo browse time interval
Connected drive type
Parameter
Parameter 0
Browsing filter source F01 to F50
Browsing favourites control
reset button
www.controltechniques.com
Range( )
0 to 32767
English (0), Custom (1), French (2),
German (3), Spanish (4), Italian (5)
999999
Idle (0), Save (1), Restore (2), Default (3)
0 to 31
Updated (0), Bypass (1)
Normal (0), Filter (1)
0 to 999
Disable (0), Slot1 (1), Slot2 (2), Slot3 (3),
Slave (4), Direct (5)
0 to 999
0 to 255
4Mbit (0), 8Mbit (1)
0 to 999999
None (0), Default (1), User (2)
0 to 600
0 to 200ms
Unidrive SP (0),
Commander SK (1), Mentor MP (2),
Affinity (4), Digitax ST (5)
Range( )
0 to 32767
Pr 0.00 to Pr 22.99
Normal (0), Filter (1)
Mentor MP Short Form Guide
Issue Number: 5