Maintenance - Sharp Gemini II Plus MX-2614N Technical Handy Manual

Maintenance Indications:
DK
DC
Magenta Drum (Counter) has reached
DM
DY
Black Developer (Counter) has reached
VK
Cyan Developer (Counter) has reached
VC
Magenta Developer (Counter) has reached the
VM
Yellow Developer (Counter) has reached
VY
Fuser Belt and Cleaner Roller Print Counter has
FK1
Fuser Heat Roller Counters have reached the
FK2
Primary Transfer Unit Counter has reached the
TK1
Secondary Transfer Unit Counter has reached
TK2
TA
CA
AA Maintenance [All] & [Colour] Counters have reached the specified limits
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:-
UKOG-0312FCZZ
Do not apply Stearic Acid (UKOG-0312FCZZ), Strontium Titanium (UKOG-0316FCZZ) or Titanium
Hydroxide (UKOG-0322FCZZ) starting powder to the Primary Transfer Belt.

Maintenance

Black Drum (Counter) has reached
the specified life.
Cyan Drum (Counter) has reached
the specified life.
the specified life.
Yellow Drum (Counter) has reached
the specified life.
the specified life.
the specified life.
specified life.
the specified life.
reached the specified limit.
specified limit
specified limit.
the specified limit.
Maintenance [All] Counter has reached specified limit
Maintenance [Colour] Counter has reached specified limit
OPC Drum
[Stearic Acid]
Replace Black Drum
Replace Cyan Drum
Replace Magenta
Drum.
Replace Yellow Drum.
Replace Black
Developer.
Replace Colour
Developer Kit.
Replace the Upper
Fuser Roller Kit.
Replace the Heat
Roller Kit
Replace the Primary
Transfer Belt and/or
Rollers.
Replace the Secondary
Transfer Belt and
Roller.
Primary Transfer Belt
UKOG-0123FCZZ
[Kynar Powder]
15
Document Solutions After Sales Service
Process
Section
(Drum)
Process
Section
(Developer)
Fuser Section
Transfer
Section