Using An Access Code; Setting/Changing The Access Code - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Using an Access Code

All parameter configuration settings for the drive and its connected peripherals
can be protected from unauthorized access by using an access code.

Setting/Changing the Access Code

1. Access the Status screen (see
2. If Port 00 (host drive) is not shown above the ESC soft key, use the
or key to scroll to Port 00.
3. Press the key to display its last-viewed folder.
4. Use the or
5. Use the or
6. Press the (Enter) key to display the Enter New Password popup box.
Stopped
0.00 Hz
Enter New Password
0 << 65535
ESC
7. Use the numeric keys to enter a desired access code value.
soft key to delete an erroneous entry.
Use the
For your convenience, write down your assigned access code and store it in
a safe place.
Access Code = ____ ____ ____ ____ ____
8. Press the ENTER soft key to enter the new access code.
9. After the access code verification screen appears, confirm the new access
code by re-entering its value.
Thereafter, the HIM immediately logs in to the drive, which is indicated
by the Log Out menu line in the PROPERTIES folder. All drive/
peripheral parameters are accessible to view or edit.
10. To initiate access code protection, do the following:
a. Use the
folder menu.
b. Press the
box.
c. Press the ENTER soft key to affirm and log out—or press the ESC soft
key to cancel.
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
Figure 6).
key to scroll to the PROPERTIES folder.
key to select Change Password.
AUTO
F
0
ENTER
or key to select Log Out from the PROPERTIES
(Enter) key to display the log out verification popup
Using the HIM Chapter 4
59