Resolving 'Changed' Or 'Requires Configuration' Conflicts; Resolving 'Not Functioning', 'Not Supported', Or 'Invalid Duplicate; Conflicts - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Resolving 'Changed' or 'Requires Configuration' Conflicts

When a 'Changed' or 'Requires Configuration' conflict exists on powerup, a '!'
symbol precedes the port number in the Device Conflicts popup box.
1. Select a port device (in this example, the Encoder card) and press either
the INFO soft key to show additional information about the conflict, or
press the FIX soft key to resolve all device conflicts.
Stopped
0.00 Hz
! 04: Encoder
Changed
Prev: I/O Module 24 V
Example screen when the INFO
soft key is pressed.
2. Press the ENTER soft key to
affirm and re-display the
Device Conflicts popup box.
Resolving 'Not Functioning' , 'Not Supported' , or 'Invalid Duplicate'

Conflicts

When a 'Not Functioning' , 'Not Supported' , or Invalid Duplicate' conflict exists
on powerup, an 'X' symbol precedes the port number in the Device Conflicts
popup box.
1. Select the port preceded with an 'X' (in this example, Port 05) and press
the INFO soft key to show additional information about the conflict (see
example below).
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
Stopped
AUTO
0.00 Hz
F
Device Conflicts:
! Port 04: Encoder
! Port 05: I/O Module 24 V
! Port 06: Device Not Found
FIX INFO
Stopped
AUTO
0.00 Hz
F
About to permanently
erase the previous
device(s) configuration
ENTER
ESC
Example screen when the FIX
soft key is pressed.
Press the ENTER soft key to affirm
and resolve all device conflicts, or
press the ESC soft key to cancel.
Stopped
AUTO
0.00 Hz
F
Device Conflicts:
! Port 04: Encoder
X Port 05: Not Functioning
! Port 06: Device Not Found
INFO
Using the HIM Chapter 4
AUTO
F
Continue?
ENTER
63