Changing Displayed Items, Adding A Scale Factor, Or Customizing; Text - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Changing Displayed Items, Adding a Scale Factor, or Customizing Text
You can further customize the Process screen by:
• Changing a displayed parameter to a different parameter.
• Applying a scale factor to the displayed parameter.
• Customizing text for the displayed parameter.
To do any or all of the above modifications, follow these steps.
1. With either the multi-line view Process screen
view Process screen
select the drive monitoring item you want to change.
2. Press the EDIT soft key.
For example, suppose you want to change the first drive monitoring item.
In this case, the Process Display 1 Edit screen is shown.
Stopped
0.00 Hz
Port 00 Proc Display 1
Param: 7 Output Current
Scale:+/- 1.00

Text:

Amps
Value: 0.00 amps
ESC
?
soft key to select what you want to change (parameter, scale, or
3. Use the
text) for the drive monitoring item.
4. Press the EDIT soft key to display its respective edit popup box (see
examples below).
Stopped
AUTO
0.00 Hz
F
Edit Proc Dspy 1 Param
7
1 << 1474
ESC ENTER
5. For parameter or scale editing, use the numeric keys and available soft keys,
and press the ENTER soft key to enter and save the item.
For text editing, use the numeric keys, available soft keys, and the
to enter each character. Then press the ENTER soft key to enter and save
the complete text string.
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
(Figure 8) displayed, use the
AUTO
F
RESET EDIT
Stopped
AUTO
0.00 Hz
F
Edit Proc Dspy 1 Scale
1.00
0.00 << 300.00
.
ESC ENTER
Using the HIM Chapter 4
(Figure 7) or the single-line
or key to
Stopped
AUTO
0.00 Hz
F
Edit Proc Dspy 1 Text
Amps
, =Move Cursor =Char Set
INS DEL CLR
ESC ENTER
key
39