Disabling Access Code Protection - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Disabling Access Code Protection

1. Access the Status screen (see
2. If Port 00 (host drive) is not shown above the ESC soft key, use the
or key to scroll to Port 00.
3. Press the key to display its last-viewed folder.
4. Use the or
5. Use the or
6. Press the (Enter) key to display the Enter Password popup box.
Stopped
0.00 Hz
Enter Password
0 << 65535
ESC
7. Use the numeric keys to enter the existing access code value.
soft key to delete an erroneous entry.
Use the
8. Press the ENTER soft key to enter the existing access code.
9. Use the or
10. Press the (Enter) key to display the Enter New Password popup box.
Stopped
0.00 Hz
Enter New Password
0 << 65535
ESC
11. Use the numeric keys and the
disable the access code protection feature.
12. Press the ENTER soft key to enter the '0' (disable) default value.
13. After the access code protection verification popup box appears, confirm
the new access code by re-entering '0' .
14. Press the ENTER soft key to disable access code protection.
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
Figure 6).
key to scroll to the PROPERTIES folder.
key to select Log In.
AUTO
F
0
ENTER
key to select Change Password.
AUTO
F
0
ENTER
soft key to enter '0' , the default value to
Using the HIM Chapter 4
61