Selecting Display Contrast - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Chapter 4 Using the HIM

Selecting Display Contrast

34
The contrast of the HIM display can be adjusted for optimal viewing. Follow
these steps to change the contrast.
1. Access the Status screen, which is displayed on HIM power up.
Figure 6 - Status Screen
Stopped
0.00 Hz
Host Drive
240V 4.2A
20G...D014
00
ESC REF
2. Use the or
connected.
Port Location
01 HIM cradle on the front of the drive.
02 DPI™ port near the bottom of the drive control pod (PowerFlex 750-Series drives) or
at the bottom of the drive (PowerFlex 7-Class drives).
03 Splitter cable port when the cable is plugged into the DPI port near the bottom of the drive control
pod (PowerFlex 750-Series drives) or at the bottom of the drive (PowerFlex 7-Class drives).
3. Press the key to display its last-viewed folder.
4. Use the or
5. Use the or
6. Press the (Enter) key to display the Set LCD Contrast edit popup
box.
7. Use the or
8. Press the ESC soft key to set the contrast and exit the screen.
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
AUTO
F
PAR# TEXT
key to scroll to the port to which the HIM is
key to scroll to the PROPERTIES folder.
key to select Adjust Contrast.
soft key to adjust contrast to the desired setting.