Setting The Date/Time For Powerflex 750-Series Drives - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Setting the Date/Time for
PowerFlex 750-Series Drives
The information in this section does not apply to PowerFlex 7-
IMPORTANT
Class drives.
The PowerFlex 750-Series drive has a real-time clock which supports its time
stamp feature for faults and alarms. This clock must be accurately set to provide
meaningful time stamp data. Follow these steps to set the date and time.
1. Access the Status screen (see
2. If Port 00 (host drive) is not shown above the ESC soft key, use the
or key to scroll to Port 00.
3. Press the key to display its last-viewed folder.
4. Use the or
5. Use the or
6. Press the (Enter) key to display the Date/Time Set screen.
Stopped
0.00 Hz
Port 00 Date / Time Set
Monday 2008/05/12
(GMT-06:00) Chicago
ESC
The top line shows the present date and time in this format:
yyyy/mm/dd
Note that the time is always displayed in a 24-hour format. For example,
6:00 pm is shown as 18:00:00.
7. Press the EDIT soft key to access the Date/Time Set Edit Mode screen,
which highlights the present time zone line.
Stopped
0.00 Hz
Port 00 Date / Time Set
Monday 2008/05/12
(GMT-06:00) Chicago
ESC
8. To select the time zone:
a. Press the ZONES soft key to display the Select Time Zone screen.
b. Use the
example, Americas).
c. Press the
d. Use the
example, Chicago).
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
Figure 6).
key to scroll to the PROPERTIES folder.
key to select Set Date and Time.
AUTO
F
10:38:47
EDIT
hh:mm:ss
AUTO
F
10:38:47
ZONES
?
or key to select your time zone region (for
(Enter) key to enter your selection.
or key to select your specific time zone (for
Using the HIM Chapter 4
35