Installing The 20-Him-C6S Him - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Chapter 2 Installing the HIM
Installing the 20-HIM-C6S
HIM
18
4. Install the HIM into the remote-mount HIM bezel.
20-HIM-A6 HIM
20-HIM-B1
Remote-Mount
HIM Bezel
The 20-HIM-C6S (NEMA Type 4X/12) HIM is designed for remote
installation and includes a 3 m/9.8 ft. long 1202-C30 cable. See
overall HIM dimensions. Choose an appropriate location to mount the 20-HIM-
C6S HIM. The distance between the HIM and drive can be increased up to 75
m/246 ft. by using a 1202-Hxx extension cable or 1202-CBL-KIT-100M cable
kit. However, a cable distance greater than 30 m/98.4 ft. is not CE compliant.
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
4 a. Push in.
4 b. Slide down.
3 m/9.8 ft. long 1202-C30 bezel cable included
with 20-HIM-B1 remote-mount HIM bezel.
Distances can be increased up to 75 m/246 ft.
(1) To increase this distance, use one of the following cables:
• 1202-H03 Extension cable (0.3 m/0.98 ft. long)
• 1202-H13 Extension cable (1.0 m/3.28 ft. long)
• 1202-H30 Extension cable (3.0 m/9.8 ft. long)
• 1202-CBL-KIT-100M cable
Note that a cable distance greater than 30 m/98.4 ft. is not CE compliant.
PowerFlex 755 drive shown
(without HIM in drive HIM bezel)
(1)
for
Figure 1