Setting Powerflex 7-Class Drives/Peripherals To Factory Defaults - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

7. Use the
• Host and Ports (Preferred): Selects the host device and all ports for a
factory default action.
• This Port Only: Selects only this port for a factory default action.
8. Press the
defaults.
Figure 9 - 'Host and Ports (Preferred)' Popup Box
Stopped
AUTO
0.00 Hz
F
WARNING
Sets most parameters in the
Host device and all ports
to factory defaults.
Continue?
ESC ENTER
Press the ENTER soft key to affirm and set most parameters
for the host drive and port devices to factory defaults. In this
case, see the host drive and port device documentation for
the settings that will not be restored—or press the ESC soft
key to cancel.

Setting PowerFlex 7-Class Drives/Peripherals to Factory Defaults

1. Access the Status screen (see
2. Use the
parameters you want to set to factory defaults (for example, Port 00 for the
host drive or the respective port number for one of the drive's connected
peripherals).
3. Press the
4. Use the
5. Use the
6. Press the
Sets all parameters to
factory defaults.
Continue?
ESC
7. Press the ENTER soft key to affirm and set all device parameter values to
factory defaults—or press the ESC soft key to cancel.
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
or key to select the appropriate action.
TIP For a description of a selected menu item, press the INFO soft key.
(Enter) key to display the warning popup box to reset
Figure 10 - 'This Port Only' Popup Box
Press the MOST soft key to set most settings for the selected port
device to factory defaults. In this case, see the host drive
documentation for the settings that will not be restored. Press
the ALL soft key to set all settings for the selected port device to
factory defaults—or press the ESC soft key to cancel.
Figure
or key to scroll to the Port of the device whose
key to display its last-viewed folder.
or key to scroll to the MEMORY folder.
or key to select Set Defaults.
(Enter) key to display the Set Defaults popup box.
Stopped
AUTO
0.00 Hz
F
WARNING
ENTER
Using the HIM
Stopped
AUTO
0.00 Hz
F
WARNING
Use MOST to reset typical
?
settings on this port
(preferred). Use ALL to
reset all settings.
?
ESC ALL MOST
6).
Chapter 4
41