PowerFlex 7-Class Drive
Attach a 20-HIM-H10 cable to the bottom of the HIM. Then plug the other end
of the cable into Port 2 on the bottom of the drive.
(PowerFlex 70
drive shown)
Port 2
In a Remote-Mount HIM Bezel (20-HIM-B1)
1. If the remote-mount HIM bezel is not mounted, see the HIM Bezel
Installation Instructions, publication 20HIM-IN002, for mounting
details.
2. Route the 3 m/9.8 ft. long 1202-C30 bezel cable (included with the 20-
HIM-B1 remote-mount HIM bezel) to the drive.
3. Connect the bezel cable to the DPI™ Port 2 on the drive as shown on
page 16
for a PowerFlex 750-Series drive or a PowerFlex 7-Class drive.
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
20-HIM-A6 HIM
20-HIM-H10 Cable
(1 m/3.28 ft. long)
Installing the HIM
Chapter 2
17