Parameter List - Allen-Bradley PowerFlex 20-HIM-A6 User Manual

Parameter List

HIM Parameters
This appendix provides information about the HIM parameters.
Besides the HIM, the following configuration tools can also be used to monitor
or change parameter values of the HIM, drive, and other connected peripherals:
• Connected Components Workbench™ software, version 1.02 or later
• DriveExplorer™ software, version 6.01 or later
• DriveExecutive™ software, version 5.01 or later
Parameter
No. Name and Description
01 [Port Number]
Displays the port on the drive to which the HIM is connected.
02 [DPI™ Data Rate]
Displays the DPI data rate at which the HIM is communicating with
the drive.
03 [Initial Screen]
Selects the initial HIM screen to be displayed on power up.
04 [Fault Dspy Type]
Selects the type of display flash to be shown when a drive or
peripheral fault is detected.
05 [Alarm Dspy Type]
Selects the type of display flash to be shown when a drive alarm is
detected.
06 [User Dspy Enable]
Enables/disables the HIM's automatic user display time function,
which is configured using Parameter 07 - [User Dspy Time].
07 [User Dspy Time]
Sets the amount of time that a screen will remain displayed as long
as the HIM keys are not used. After this time elapses, the screen is
automatically replaced by the initial screen, which is selected
using Parameter 03 - [Initial Screen].
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
B
Appendix
Details
Minimum: 1
Maximum: 7
Type: Read Only
Values: 0 = 125 Kbps
1 = 500 Kbps
Type: Read Only
Default: 0 = Status Scrn
Value: 0 = Status Scrn
1 = Process Scrn
Type: Read/Write
Reset Required: Yes
Default: 1 = Flash Status
Values: 0 = Flash Bklite
1 = Flash Status
2 = Flash None
Type: Read/Write
Reset Required: No
Default: 1 = Flash Status
Values: 0 = Flash Bklite
1 = Flash Status
2 = Flash None
Type: Read/Write
Reset Required: No
Default: 1 = Enable
Values: 0 = Disable
1 = Enable
Type: Read/Write
Reset Required: Yes
Default: 60 sec
Minimum: 10 sec
Maximum: 300 sec
Type: Read/Write
Reset Required: Yes
69