Chapter 2
Installing the HIM
16
Using Drive Port 2 Connection for Hand-Held Operation
PowerFlex 755T-Series Drive
Attach a splitter cable to the cradle connector of the HIM. Then plug the other
end of the cable into DPI Port 02 near the bottom of the drive control pod.
(PowerFlex 755T
drive shown with
cover removed)
PowerFlex 750-Series Drive
Attach a 20-HIM-H10 cable to the bottom of the HIM. Then plug the other end
of the cable into Port 2 near the bottom of the drive control pod.
(PowerFlex 755 drive
shown with cover
removed)
Port 2
PE
Rockwell Automation Publication 20HIM-UM001E-EN-P - May 2017
20-HIM-A6 HIM
Cradle
Connector
DPI Port 02
Splitter Cable
(1 m/3.28 ft. long)
20-HIM-A6 HIM
20-HIM-H10 Cable
PE
(1 m/3.28 ft. long)