ADInstruments POWERLAB TEACHING SERIES Owner's Manual page 6

Regulatory Symbols
Devices manufactured by ADInstruments that are designed for direct connection to
humans and animals are tested to IEC60601-1:1998 and IEC60601-1:2005 (including
amendments 1 and 2) and EN61326-1:2006, and carry one or more of the safety symbols
below. These symbols appear next to those inputs and output connectors that can be
directly connected to human subjects.
Further information is available on request.
2
B (body protected) symbol. Equipment marked with this symbol is
suitable for connection to humans and animals provided there is not
direct electrical connection to the heart and provides basic protection
against electric shock.
BF (body protected- floating) symbol. This means that the input
connectors are suitable for connection to humans and animals provided
there is no direct electrical connection to the heart and provides
increased protection against electric shock over B rated applied parts.
Warning symbol. The exclamation mark inside a triangle means that the
!
supplied documentation must be consulted for operating, cautionary or
safety information before using the device.
CE Mark. All front-end amplifiers and PowerLab systems carry the CE
mark and meet the appropriate EU directives.
Refer to booklet symbol. This symbol specifies that the user needs
to refer to the Instruction manual or the booklet associated with the
device.
Date of Manufacture/ Manufacturer's name symbol. This symbol
indicates the date of manufacture of the device and the name of the
manufacturer
WEEE directive symbol. Unwanted equipment bearing the Waste
Electrical and Electronic Equipment (WEEE) Directive symbol requires
separate waste collection. (See disposal section at the end of this
chapter)
PowerLab Teaching Series - Owner's Guide