Chapter8 General Care And Cleaning; General Care; Cleaning - ADInstruments DSA2016TG User Manual

Handheld spectrum analyzer

Hide thumbs Also See for DSA2016TG:

Table of Contents

Chapter8 General Care and Cleaning

Do not put or leave the device in a place where the LCD display will be exposed to direct sunlight

for long periods of time.

Note: To avoid damage to the oscilloscope or probes, do not expose them to sprays, liquids, or

solvents.

Examine the oscilloscope and probes as often as operating conditions require. To clean the

exterior surface, perform the following steps:

1） Use a lint-free cloth to remove floating dust on the outside of the oscilloscope and probes.

Take care to avoid scratching the glabrous display filter.

2） Use a soft cloth dampened with water to clean the oscilloscope. For more efficient cleaning,

you may use an aqueous solution of 75% isopropyl alcohol.

Note: To avoid damage to the surface of the oscilloscope or probes, do not use any

corrosive or chemical cleaning agents.

Table of Contents