see Section 3, "System installation"
System installation
Installing the RMP400 with an RMI or RMI-Q
CNC machining
centre spindle
RMP400
inspection probe
Workpiece
Operating envelope
Radio transmission does not require line-of-sight
between the probe and interface as it works
via reflected paths, and will pass through gaps
and machine tool windows. This allows easy
installation, either inside or outside the machine
enclosure, as long as the probe and RMI or
RMI-Q are kept within the performance envelope
shown overleaf.
Coolant and swarf residue accumulating on
the RMP400 and RMI or RMI-Q may have a
detrimental effect on transmission performance.
Wipe clean as often as is necessary to maintain
unrestricted transmission.
Stylus
Typical tool
setting probe
Draft 5 16/04/18
RMI or RMI-Q
Mounting
interface
bracket
Interface unit
When operating, do not cover the probe glass
window, RMI or RMI-Q with your hands, as this
will affect the performance.
3.1
CNC
machine
control
Cable