Pna-L Series Test Set And Power Configuration Options - Keysight PNA-X Series Configuration Manual

PNA-L Series Test Set and Power Configuration Options

The PNA-L is an integrated vector network analyzer featuring a
built-in S-parameter test set, one synthesized source used for
device stimulus, a solid state drive, USB interfaces, and a 12.1"
LCD touch screen display. The N5239B, N5231B and the N5232B
have 50 ohm, ruggedized 3.5 mm (m) test ports. The N5234A and
N5235B have 50 ohm, ruggedized 2.4 mm (m) test portcluded
with each instrument is a mouse, keyboard (U.S. style). For
one day of on-site productivity assistance (not included with
instrument purchase), request quantity 1 each PS-S20-PNA.
A test set and power configuration option is mandatory. Choose
one of the following:
2 ports, single source, base configuration (Option
200)
The 2-port with base configuration has no front-panel access loops.
Source
R1
A
Test port 1
2 ports, single source, with configurable test set
and source attenuators (Option 216)
The 2-port test set comes with a configurable test set and
source attenuator at each port. The configurable test set adds six
front-panel access loops. The loops provide access to the signal
path between (a) the source output and the reference receiver,
(b) the source output and directional coupler thru arm, and (c) the
coupled arm of the directional coupler and the port receiver at all
ports. The source attenuators are settable in 10 dB steps up to 60 dB.
Source
60 dB
R1
A
Test port 1
Find us at www.keysight.com
LO
To receivers
R2
B
Test port 2
LO
To receivers
60 dB
R2
B
Test port 2
4 ports, single source, base configuration (Option
400)
The 4-port base configuration has no front-panel loops, and is
available only on the N5231B and N5232B.
R
A
Test port 1 Test port 2
4 ports, single source, with configurable test set
and source attenuator (Option 416)
The 4-port test set comes with a configurable test set and one
source attenuator to be shared with all ports. The configurable
test set adds nine front-panel access loops. The loops provide
access to the signal path between (a) the source output and the
reference receiver, (b) the source output and directional coupler
thru arm at all ports, and (c) the coupled arm of the directional
coupler and the port receiver at all ports. The source attenuator
is settable in 10 dB steps up to 60 dB. This configuration is
available only on the N5231B and N5232B.
R
A
Test port 1 Test port 2
Source
LO
To receivers
B C
Test port 3 Test port 4
Source
LO
60 dB
To receivers
B C
Test port 3 Test port 4
D
D
Page 19