For Devices With 2.4 Mm Connectors - Keysight PNA-X Series Configuration Manual

For devices with 1.85 mm connectors (Continued)
Electronic calibration kits
N4694A Microwave ECal: 10 MHz to 67 GHz, 2-ports. Includes:
– Option M0F module with: N4694-60001 1.85 mm (f) to
1.85 mm (m) ECal module
– Option 00M module with: N4694-60002 1.85 mm (m) to
1.85 mm (m) ECal module
– Option 00F module with: N4694-60003 1.85 mm (f) to
1.85 mm (f) ECal module
– Option 00A adds:
– 85058-60113 1.85 mm (m) to 1.85 mm (m) adapter
– 85058-60114 1.85 mm (f) to 1.85 mm (f) adapter
– Option 150: Replaces standard storage container with a
wooden box
N4694D Microwave ECal: DC or 10 MHz to 67 GHz, 2-ports.
1
Includes:
– Option F0F: Both connectors are 1.85 mm female on module
– Option M0F: 1 female and 1 male 1.85 mm connector on
module
– Option M0M: Both connectors are 1.85 mm male on module
– Option 0DC: DC to 67 GHz
– Option 100: 10 MHz to 67 GHz
– Option 00A adds:
– 85058-60113 1.85 mm (m) to 1.85 mm (m) adapter
– 85058-60114 1.85 mm (f) to 1.85 mm (f) adapter
Cables
– N4697E Single, flexible:
2
– 1.85 mm (f) to 1.85 mm (f), 96.5 cm, 38 inches
– N4697F Set, flexible:
2
– One 1.85 mm (f) to 1.85 mm (f) cable, 62.2 cm,
24.5 inches, p/n N4697-60100
– One 1.85 mm (f) to 1.85 mm (m) cable, 62.2 cm,
24.5 inches, p/n N4697-60200
– N4421B-K67 Single, flexible: 1.85 mm (f) to 1.85 mm (m),
91.4 cm, 36 inches
Adapter set
– 85130H 1.85 mm to 1.85 mm
2
1. The PNA Series must have firmware revision A.12.85.00 or above for
operation with the N469xD Series ECal.
2. Special rugged female connector specifically for connecting to the
network analyzer test port, but does not mate with a standard male
connector.
Find us at www.keysight.com

For devices with 2.4 mm connectors

Mechanical calibration kit
85056A standard: DC to 50 GHz. Includes:
– 00901-60003 2.4 mm (m) fixed broadband load
– 00902-60004 2.4 mm (f) fixed broadband load
– 00915-60003 2.4 mm (m) sliding load
– 00915-60004 2.4 mm (f) sliding load
– 85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
– 85056-60006 2.4 mm (f) to 2.4 mm (f) adapter
– 85056-60007 2.4 mm (m) to 2.4 mm (f) adapter
– 85056-60020 2.4 mm (m) short
– 85056-60021 2.4 mm (f) short
– 85056-60022 2.4 mm (m) open
– 85056-60023 2.4 mm (f) open
– 85056D economy: DC to 50 GHz. Includes:
– 00901-60003 2.4 mm (m) fixed broadband load
– 00902-60004 2.4 mm (f) fixed broadband load
– 85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
– 85056-60006 2.4 mm (f) to 2.4 mm (f) adapter
– 85056-60007 2.4 mm (m) to 2.4 mm (f) adapter
– 85056-60020 2.4 mm (m) short
– 85056-60021 2.4 mm (f) short
– 85056-60022 2.4 mm (m) open
– 85056-60023 2.4 mm (f) open
Electronic calibration kits
N4693A Microwave ECal: 10 MHz to 50 GHz, 2-ports. Includes:
– Option M0F module with: N4693-60001 2.4 mm (f) to
2.4 mm (m) ECal module
– Option 00M module with: N4693-60002 2.4 mm (m) to
2.4 mm (m) ECal module
– Option 00F module with: N4693-60003 2.4 mm (f) to
2.4 mm (f) ECal module
– Option 00A adds:
– 85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
– 85056-60006 2.4 mm (f) to 2.4 mm (f) adapter
– Option 150: Replaces standard storage container with a
wooden box
N4693D Microwave ECal: DC or 10 MHz to 50 GHz, 2-ports.
1
Includes:
– Option F0F: Both connectors are 2.4 mm female on module
– Option M0F: 1 female and 1 male 2.4 mm connector on
module
– Option M0M: Both connectors are 2.4 mm male on module
– Option 0DC: DC to 50 GHz
– Option 100: 10 MHz to 50 GHz
– Option 00A adds:
– 85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
– 85058-60006 2.4 mm (f) to 2.4 mm (f) adapter
Page 39