Hardware Options - Keysight PNA-X Series Configuration Manual

PNA Family Network Analyzer Configurations (Continued)
PNA-X Series
N5249B 900 Hz/10 MHz to 8.5 GHz
N5241B 900 Hz/10 MHz to 13.5 GHz
N5242B 900 Hz/10 MHz to 26.5 GHz
N5244B 900 Hz/10 MHz to 43.5 GHz
N5245B 900 Hz/10 MHz to 50 GHz
N5247B 900 Hz/10 MHz to 67 GHz

Hardware options

Description
Add IF inputs
Add pulse modulator to first source
Add pulse modulator to second source
Add low-noise receiver
Find us at www.keysight.com
PNA Series
N5221B 900 Hz/10 MHz to 13.5 GHz
N5222B 900 Hz/10 MHz to 26.5 GHz
N5224B 900 Hz/10 MHz to 43.5 GHz
N5225B 900 Hz/10 MHz to 50 GHz
N5227B 900 Hz/10 MHz to 67 GHz
For PNA-X For PNA
Series Series
N524xB-020 N522xB-020
N524xB-021 N522xB-021
N524xB-022 N522xB-022
N524xB-029 N/A
PNA-L Series
N5239B 300 kHz to 8.5 GHz
N5231B 300 kHz to 13.5 GHz
N5232B 300 kHz to 20 GHz
N5234B 10 MHz to 43.5 GHz
N5235B 10 MHz to 50 GHz
For PNA-L Additional Information
Series
N/A Used for antenna measurements and mm-wave extenders
N/A
N/A Requires one of Option 222, 224, 4xx
N/A S93029A application software is needed to control
the noise receiver for noise figure and noise power
measurements. For N5241/42/49B, requires one of
options 21x, 22x, 41x, or 42x. For N5244/45/47B,
requires one of options 22x or 42x. On N5247B, noise
receiver works up to 50 GHz only.
Test Port Connector
3.5 mm (male)
3.5 mm (male)
3.5 mm (male)
2.4 mm (male)
2.4 mm (male)
1.85 mm (male)
Page 6