Accessories, Calibration Options - Keysight PNA-X Series Configuration Manual

PNA Family Network Analyzer Configurations (Continued)
PNA-X Series
N5249B 900 Hz/10 MHz to 8.5 GHz
N5241B 900 Hz/10 MHz to 13.5 GHz
N5242B 900 Hz/10 MHz to 26.5 GHz
N5244B 900 Hz/10 MHz to 43.5 GHz
N5245B 900 Hz/10 MHz to 50 GHz
N5247B 900 Hz/10 MHz to 67 GHz

Accessories, calibration options

Description
Accessories
Rack mount kit for use without handles
Rack mount kit for use with handles
Pulse I/O adapter
Comb generator
1
Calibration software
Built-in performance test software for standard compliant
calibration
2
Calibration documentation
ISO 17025 compliant calibration
Commercial calibration certificate with test data
ANSI Z540 compliant calibration
1. A fully configured NVNA system requires two comb generators with power supplies, Keysight calibration kits
(mechanical or ECal), and a power meter and sensor or USB power sensor.
2. Additional hardware required. Please refer to the analyzer's service guide for required service-test
equipment.
Find us at www.keysight.com
PNA Series
N5221B 900 Hz/10 MHz to 13.5 GHz
N5222B 900 Hz/10 MHz to 26.5 GHz
N5224B 900 Hz/10 MHz to 43.5 GHz
N5225B 900 Hz/10 MHz to 50 GHz
N5227B 900 Hz/10 MHz to 67 GHz
For PNA-X Series
N524xB-1CM
N524xB-1CP
N1966A
U9391C/F/G
S93898B/A
N524xB-1A7
N524xB-UK6
N524xB-A6J
PNA-L Series
N5239B 300 kHz to 8.5 GHz
N5231B 300 kHz to 13.5 GHz
N5232B 300 kHz to 20 GHz
N5234B 10 MHz to 43.5 GHz
N5235B 10 MHz to 50 GHz
For PNA Series For PNA-L Series
N522xB-1CM N523xB-1CM
N522xB-1CP N523xB-1CP
N1966A N/A
N/A N/A
S93898B/A S93898B/A
N522xB-1A7 N523xB-1A7
N522xB-UK6 N523xB-UK6
N522xB-A6J N523xB-A6J
Test Port Connector
3.5 mm (male)
3.5 mm (male)
3.5 mm (male)
2.4 mm (male)
2.4 mm (male)
1.85 mm (male)
Additional information
Page 9