Delete - Dahua Modular VTO User Manual

Username
Password
Port No.
Protocol
Stream
Channel
Step 4 Table 7-13 for details.
Parameter Description
IPC Name
IP Address
Username
Password
Port No.
Protocol
Stream
Channel
Click "OK" to complete adding.
Step 5

7.10.2 Delete

Click to delete camera info.
Step 3 Parameter
Enter IPC/NVR/XVR/HCVR name.
Enter IP address of the connected IPC/NVR/XVR/HCVR.
Enter the username and password to login WEB interface of
IPC/NVR/XVR/HCVR.
It is 554 by default.
It consists of local protocol and Onvif protocol. Please select
according to the protocol supported by the connected device.
Select from main format and extra format according to needs.
 Main format: large stream, high definition, large occupied
bandwidth, suitable for local storage.
 Extra format: smooth image, small occupied bandwidth, suitable
for low bandwidth network transmission.
To connect IPC, it is 1 by default.

To connect NVR/XVR/HCVR, it is set to channel no. of IPC on

NVR/XVR/HCVR.
Table 7-13
Description
Enter the username and password to login
WEB interface of IPC/NVR/XVR/HCVR.
It is 554 by default.
It consists of local protocol and Onvif
protocol. Please select according to the
protocol supported by the connected
device.
Select from main format and extra format
according to needs.
Main format: large stream, high

definition, large occupied bandwidth,
suitable for local storage.
Extra format: smooth image, small

occupied bandwidth, suitable for low
bandwidth network transmission.
 To connect IPC, it is 1 by default.
 To connect NVR/XVR/HCVR, it is set
to channel no.
NVR/XVR/HCVR.
of IPC on
86