Device Mounting; Surface Mounting - Dahua Modular VTO User Manual

Modular VTO consists of single module mounting, double module mounting and 3-module
mounting. Take 3-module mounting for example.
 When leaving factory by default, visiting cards and card cover have been included in the
attachment.
 When power-on after mounting, please ensure that all modules have been connected;
otherwise, they fail to work normally.
Before installation of surface mounting box and flush mounting box, cables in the wall shall

go through the bracket or flush mounting box.
4.1

Surface Mounting

Step 1 Drill holes according to hole positions of surface mounting box, and put expansion pipe
in place.
Step 2 Fix surface mounting box onto the wall with ST3×18 screws.
Step 3 Fix every module onto front panel with M3×6 screws.
Connect cables. Please refer to "2 Product Structure".
Step 4
Step 5 Fix the front panel onto surface mounting box with M4×40 screws.
Step 6 Apply glue between surface mounting box and the wall.
Write room number or the user's name on the visiting card, and insert it into user
Step 7
directory.
4

Device Mounting

14