Dahua Modular VTO User Manual page 31

5.1.1.3 LAN Config
Configure VTO building no., unit no. and VTO no. info.
Select "System Config> LAN Config".
Step 1
The system displays "LAN Config" interface, as shown in Figure 5-6.
Enter VTO "Building No.", "Building Unit No." and "VTO No.".
Step 2
To call the management centre, please tick "Register to the MGT Centre", and set

"MGT Centre IP Address" and "MGT Port No.". Enable or disable "No Answer
Transfer MGT Centre".
To provide group call function, please tick "Group Call" and set "Max Extension

Index", which is 5 at most.
Click "OK".
Step 3
5.1.1.4 Add VTH
Add VTH info. After VTH and VTO have completed debugging, VTH will be registered on VTO
automatically and realize bonding.
Add master VTH.

After "Network" interface of extension VTH has added and enabled master VTH, VTO

interface will obtain extension VTH info automatically.
Select "System Config> Digital Indoor Station Manager".
Step 1
The system displays "Digital Indoor Station Manager" interface, as shown in Figure 5-7.
Figure 5-6
21