Ddns Server - Dahua Modular VTO User Manual

Parameter
Click "OK" to save the settings.
Step 5
In case that the port is modified, enter "http://VTO IP: WEB port no." in the browser, to
visit WEB interface of this VTO.

7.5.4 DDNS Server

In case of frequent changes in IP address of the device, DDNS (Dynamic Domain Name Server)
dynamically updates the relation between domain name and IP address on DNS server, and
ensures that users are able to visit the device through domain name.
Before configuration, please check if the device supports DDNS server; login

corresponding DDNS website to register username, password and domain name info.
After the user registers successfully on DDNS website and logins, view the registered

user's all connected devices.
Select "System Config > Network Config > DDNS".
Step 1
The system displays "DDNS" interface, as shown in Figure 7-17.
Tick "Enable" to enable DDNS server function.
Step 2
Step 3 Set parameters and refer to
Step 4
Server Type
Server Name
Server Port
Realm
User
Password
Description
rtsp://ip:port/cam/realmonitor?channel=1&subtype=0
Table 7-2
Figure 7-17
Parameter Description
Server type refers to name of DDNS server provider.
Relation between server type and server name is as
follows.


Port no. of DDNS server.
Domain name registered by the user at the website of
DDNS server provider.
User name and password obtained from DDNS server
provider. The user needs to register (including user
Dyndns DDNS address is: members.dyndns.org.
NO-IP DDNS address is: dynupdate.no-ip.com.
59