Vth Settings (Version 3.1) - Dahua Modular VTO User Manual

Select room no. and click "OK".
Step 5
The interface displays room no. info and corresponding button turns green, as shown in
Figure 5-12.
Click "Save" to save the settings.
Step 6
After saving, reboot the device to take effect.

5.1.2 VTH Settings (Version 3.1)

5.1.2.1 Initialization
Set the password and bind your Email.
 Password: it is used to enter project setting interface.
Email: it is used to retrieve your password when you forget it.

Step 1 Power on the device.
The system displays "Welcome" and enters "Device Initialization" interface, as shown in
Figure 5-13.
Figure 5-11
Figure 5-12
24